Page 95

20558CB

Loading And Unloading A Dump Trailer DROP-N-GO ROLL OFF DUMP LOADING AND UNLOADING 91 *WARNING – Failure to follow instructions may cause serious injury or death* 5.3.1.4 Unloading Box from Trailer 1. Put towing vehicle in Neutral. 2. Lift the dump box with the KTI hyd. unit to about a 40 degree angle. 3. Start letting out the winch for the box to slide off slowly, if box does not begin to slide, raise the bed with the KTI hyd. unit a little more. Ensure the trailer rails don’t dig into the ground. *WARNING – DO NOT STAND IN FRONT OF TRAILER AS THE TOW VEHICLE WILL START TO MOVE WITH THE TRAILER* 4. Once the box is completely off, pull forward with your towing vehicle to give clearance to unhook the winch cable. 5. Let down the trailer frame and roll up the winch cable.


20558CB
To see the actual publication please follow the link above