Page 144

20558CB

Accessories 13) SECOND CYLINDER (IN/OUT): Extend the second cylinder by pressing the OUT button. Keep an eye on the oil level in the reservoir. With the cylinder fully extended, the oil level should not go below ½ full. 14) After the second cylinder is fully extended, press the IN button to fully retract 140 the cylinder. 15) Extend and retract the second cylinder a few times until all the air is removed from the hydraulic oil. 16) After both cylinders are primed and fully retracted, recheck the level of the oil in the reservoir. BATTERY CABLES Low voltage will cause the motor to run at higher amps and may cause damage to other electrical components. To minimize voltage drop, increase the gauge size of the battery cables as the length of the positive and ground cables increase. Cable Length Wire Gauge Nominal OD (in). 1 to 2 feet 4 gauge 0.43 3 to 4 feet 2 gauge 0.49 5 to 7 feet 1 gauge 0.56 8 to 9 feet 1/0 gauge 0.61 10 to 12 feet 2/0 gauge 0.66 13 to 15 feet 3/0 gauge 0.72 16 to 19 feet 4/0 gauge 0.78 diagram A-4 diagram A-5


20558CB
To see the actual publication please follow the link above